Polytron Oil Additive ( Polytron MTC )
Motor Oil
There are two primary functions of motor oil – the
first is to lubricate the moving parts of the engine so as to minimize
friction, and the second is to protect the metal from corrosion and wear
and tear. However, motor oil alone is not able to perform both
functions properly on its own. Hence, oil additives
which contain the necessary chemicals to provide better lubrication and
proper protection are mixed in with the motor oil. This enhances the
performance of the base motor oil or lubricant.
Polytron MTC
Polytron MTC (Metal Treatment Concentrate) is an
antiwear oil additive that protects metal parts from wear and tear, but
unlike other such additives, Polytron MTC is polarized. This means that
when it is applied, the elements in the MTC are attracted to the metal
surfaces where they permeate into the metal structure. Then, through a
metallurgical process, a thin layer of polished, harder metal is formed
which increases the wear resistance of the metal parts and increases
durability by at least a hundred times more.
This proprietary technology is what makes Polytron MTC
the best oil additive available. Unlike most other motor oil additives,
Polytron MTC does not include any viscosity index improvers (VIIs) or
viscosity modifiers. There are also no PTFE (Polytetrafluoroethylene –
Teflon is a well-known brand-name) or Molybdenum Disulfide (MoS2)
solids. The purpose of the MTC is to increase the wear life of the metal
engine parts by transforming the metallic surface itself to make it
harder for more protection and more polished to reduce friction. Reduced
friction will also lead to an improvement in fuel efficiency as well as
power.
All in all, Polytron MTC is not only the best because of its
performance but also because it will save you a lot of expenses in the
maintenance of your car. By adding 10% by volume to the base oil,
Polytron MTC will ensure that your car’s engines are 95% more resistant
to wear under extreme temperature and pressure. It is compatible with
all motor oils and lubricants that are available in the
market. It will also act as a dispersant by dissolving any contaminants
or deposits and suspending them in the oil to prevent them from
coagulating.
As mentioned, just 10% of Polytron MTC will keep your car’s engine
clean as well as reinforced to withstand wear. Suggested application is
one 16 oz bottle to a 4-5 quart crankcase, first time application at
least 200 miles before the car is due for an oil change. Successive
applications can be made during alternate oil changes.
Comments
Post a Comment